Change Pin; Download Phonebook - Telefunken TX 100 Série Mode D'emploi

6. The handset displays Device removed from active list.
Note: Even though the active device is removed from the active devices list, it is still on the paired
devices list
G. Change PIN
You are required to enter a PIN when establishing a Bluetooth connection.
The default Pin of your telephone base is 0000.
1. In standby mode, press MENU/OK and choose Bluetooth.
2. select Change PIN,
3. The display shows ENTER NEW PIN and the existing PIN.
4. Use the keypad to enter a new four-digit code.
5. Press MENU/OK to save.
H. Download phonebook
You can download up to four mobile phone phonebooks (phonebooks) to your TELEFUNKEN TX
1** telephone system via Bluetooth wireless technology. Each downloaded phonebook can store
up to 1,500 entries with up to 30 digits for each phone number and 15 characters for each name.
Before downloading the phonebook, make sure the mobile phone is paired to your TELEFUNKEN
TX 1** and on the active devices list.
Place your mobile phone next to the telephone base when you download a mobile phone
phonebook to your TELEFUNKEN TX1**
To download a mobile phone phonebook
1. In standby mode, press MENU/OK and choose Bluetooth.
2. Select Download dir.
- If there is no MOBILE phone paired to the system, the handset displays No mobile
device paired.
- PressOK to add mobile.
3. Select a device, then confirm by MENU/OK.
4. If the selected device is on the paired devices list but not on the active devices list, the
handset displays No mobile on active devices list. Press OK to add.
5. If the selected device is on the active devices list but disconnected, the handset displays
Not connected. Place it next to the base to connect mobile. Press OK.
6. If the selected device's phonebook has already been downloaded to the TX 1** phone
before, the handset displays Mobile Phone A Last update: MM/DD/YY To continue,
press OK.
- If you press MENU/OK to continue the download process, the stored phonebook for
that particular mobile phone is erased and replaced with the current mobile phone
phonebook.
- Press MENU/OK to confirm.
- If you have edited the downloaded entries those changes are lost.
7. If you already have four downloaded phonebooks, the handset displays Memory is full.
Replace current phonebook? Press OK when you try to download another mobile phone
phonebook.
- Press MENU/OK and the system prompt you to replace an existing phonebook.
8. Press UP/DOWN to select one of the following options:
9. Phone memory - download all contacts stored in your phone memory.
- SIM card only - download all contacts stored in your SIM card.
- Phone and SIM - download all contacts stored in both your phone memory and SIM
card.
When the downloading process is complete, the handset displays
Download ended Total #XXXX entries saved
Press MENU/OK or OFF to return to the download phonebook menu.
TX Bluetooth Guide 54