Pairing And Connecting A Mobile Phone - Telefunken TX 100 Série Mode D'emploi

Bluetooth enabled devices, paired and connected to the telephone base. A maximum of
two paired devices (two mobile phones, or one mobile phone and one headset) can be
connected to the telephone base, but only one can be on a call at a time.
Bluetooth mobile phone
Refers to a mobile bluetooth enabled mobile telephone.
Mobile line
The telephone line associated with your mobile phone service.
On your TX 1** handset, press mobile to use the mobile line.
Connected
A Bluetooth enabled device can only be used when it is connected to the TX 1** base.
Disconnected
A diagonal line appears across devices 1 and/or 2 when the corresponding Bluetooth
enabled device is disconnected from the telephone base.
Discoverable mode
Before a Bluetooth enabled device can be paired, it must be set to this mode.. Depending
on the manufacturer, this mode is sometimes referred to as Find Me or Visibility.
Home line
Your conventional telephone land line.
On your TELEFUNKEN TX 1** handset, press HOME to use the home line.
Paired devices
Bluetooth enabled devices (mobile phone or headset) that have shared registration
information with the telephone base. A total of four Bluetooth enabled devices can be
paired with the telephone base; however, only two paired devices can be connected to the
base at a time.
Pairing
Sometimes refers to as bonding. The process of sharing registration information between
two Bluetooth enabled devices. Your Bluetooth enabled mobile phone or headset must first
be paired to the telephone base in order to use it with this cordless phone system.
PIN
By default, the PIN is 0000 for the telephone base and for most Bluetooth devices. PIN
information must be exchanged between Bluetooth devices before they can be used. This
is also known as a Passkey or Passcode.
Bluetooth setup
To use a Bluetooth enabled mobile phone with your TELEFUNKEN TX 1** , you must first pair and
connect your Bluetooth device(s) with the telephone base. All TX 1** handsets can be used to
make or answer calls on the mobile phone line.
Bluetooth wireless technology operates within a short range. When you pair a Bluetooth mobile
phone or Bluetooth headset to the telephone base, move closer to the telephone base to maintain
sufficient signal strength.
C. Pairing and connecting a mobile phone
Before you begin, make sure that :
- You have mobile coverage
- Your mobile phone is Bluetooth enabled and not connected to any other Bluetooth device
(laptop, headset...). Refer to your mobile phone User's Manual to learn how to search for or
add new Bluetooth devices.
1. In standby mode, press MENU/OK and select Bluetooth.
2. Select Add mobile.
3. Place your Bluetooth enabled mobile phone next to base and confirm by Menu/OK
TX Bluetooth Guide 50