Cleaning And Maintenance; Ce-Statement - EUROM E-Convect wifi Manuel D'utilisation

Overheating safeguard
In case of internal overheating, the overheating safeguard will switch the heater
off. This may occur if the heater cannot give off enough heat or if it cannot draw in
enough fresh air. As mentioned above, this is generally caused by (partially)
covering the heater, obstructing the air intake and/or outlet grills or installing the
heater too close to a wall or ceiling or something similar. When the heater has
cooled down sufficiently, it will in principle start again automatically, however if you
do not remove the cause of the cut-off then this will probably be repeated. Regular
overheating can give rise to irreparable damage. If the overheating protection
switches the heater off, then you must set the main switch to OFF (O), unplug and
allow the heater to cool down. Remove and/or amend the cause of overheating and
reuse the heater as normal. If you cannot find a cause and overheating recurs, stop
using the heater, and take it in for inspection/repair.

Cleaning and maintenance

Keep the heater clean. Switch off the heater, remove the plug from the socket and
allow the heater to cool down before cleaning or carrying out maintenance work.
 Wipe the outside of the heater regularly with a dry or slightly damp cloth. Do
not use aggressive soaps, sprays, cleaners or abrasives, waxes, polishes or
chemical solutions!
 You can keep the back of the heater free of dust with a feather duster. For
thorough cleaning of the back, you can unscrew the heater from the wall.
 If you want to clean away the heater at the end of the season, you can simply
unscrew it and store it, if possible in the original packaging, upright in a cool.
Dry and dust-free place.
Removal
In the EU this symbol indicates that this product may not be
disposed of as ordinary household waste. Old equipment contains
valuable materials, suitable for recycling. These materials should
be made suitable for reuse in order to prevent any adverse effects
to health and the environment caused by unregulated waste
collection. Therefore, please make sure that you bring old
equipment to a designated collection point. Alternatively, contact
the original supplier, who can make sure that as many of the
components as possible can be recycled.

CE-statement

See page 95.
38