EUROM E-Convect wifi Manuel D'utilisation page 36

Using and working
 Make sure that the main switch is OFF (O)
 Unroll the electrical cable entirely and insert the plug into a suitable 220-240V
socket.
 Set the main switch to ON (l). The display will show the current temperature.
 When the blue Wi-Fi light is blinking, the heater can be connected to the
Eurom Smart app. If you do not want to operate the stove with the app, you can
turn off this function (and therefore also the blue blinking light). Press and hold
the On/Off button until the text "OF" appears on the screen. The blue light will
now extinguish. Press the On/Off button again to turn on the Wi-Fi function. The
blue light is blinking again.
Thermostat:
 If you press the + or - key, the temperature setting will flash 5x on the display.
 You can adjust the temperature setting by pressing the + or - key while it is
flashing. With each key press, the temperature will be increased (+) or
decreased (-) by one degree.
 The device will retain the temperature setting by
switching itself on and off automatically.
 Because the temperature sensor is located on the
heater, the measurement is not particularly
accurate. If you want a more accurate
measurement, connect the separate thermostat
supplied by inserting the plug under the control
panel and moving the sensor two meters away from
the heater, see the illustration. When you have plugged in the separate
thermostat, it will automatically take over the thermostat function.
 The display will switch off if you change nothing in the settings for 10 seconds.
You can reactivate it by pressing once on any button at random.
 Press the ON/OFF button first in order to switch the device E-convect off. The
heater is now in standby mode. Now switch the main switch off (O); the lamp
will go out. Finally remove the plug from the socket.
Timer
The E-convect Wifi has a timer function that can be used with the app.
Wi-Fi and app operation
The heater can also be controlled with an App. To do this, the heater must be
connected to a Wi-Fi modem.
Download the Eurom Smart App
Scan the QR code below or search for 'Eurom Smart' in the App store or Google
-
Play and follow the download instructions.
36