Designated Application Area - Burkert 2103 Manuel D'utilisation

5.2.1. Options
• Control unit
Different versions of the activation units are available depending
on the requirement.
• Stroke limitation
Limit of the maximum open position / flow rate by means of
adjusting screw.
• Feedback indicator
The device features mechanical limit switches or inductive prox-
imity switches.
5.2.2. device versions
actuator sizes
The piston-controlled diaphragm valve is available for the following
actuator sizes:
ø 50 mm, ø 70 mm, ø 90 mm, ø 130 mm.
pilot pressure
Designs with lower pilot pressure (reduced spring force) are
available on request.
Contact your Bürkert sales office or our Sales Center, e-mail:
info@de.buerkert.com
10
english
Type 2103
Product description
5.3. designated application area
The diaphragm valve has been designed for use with dirty and
aggressive media. The valves may only control media which do not
corrode the body and the seal materials (see type label).
Observe the maximum pressure range according to the
type label!
• Ultrapure, sterile, aggressive or abrasive media.
• Highly viscous media.
5.3.1. application areas
e.g. plant construction
luxury food and food processing industry
bottling plant
chemical engineering
pharmaceutics
biotechnology