Safety Measures - Mettler Toledo SevenGo Duo pro SG68 Mode D'emploi

Safety measures

2 Safety measures
Measures for your protection
Risk of explosion
Risk of corrosion
Measures for your operational safety
Caution
4
●
Never work in an environment subject to explosion hazards! The housing of
the instrument is not gas tight (explosion hazard due to spark formation, cor-
ro sion caused by the ingress of gases).
●
When using chemicals and solvents, comply with the instructions of the pro-
duc er and the general lab safety rules!
●
Never unscrew the two halves of the housing!
●
Have the meter serviced only by METTLER TOLEDO Service!
●
Any spillage should be wiped off immediately! Some solvents might cause cor-
ro sion of the housing.
●
Avoid the following environmental influences:
•
Powerful vibrations
•
Direct sunlight
•
Atmospheric humidity greater than 80%
•
Corrosive gas atmosphere
•
Temperatures below 5 °C and above 40 °C
•
Powerful electric or magnetic fields
pH/ORP/Ion/DO meter SG68