Fitting The Wrist Strap; Sevengo™ Clip - Mettler Toledo SevenGo Duo pro SG68 Mode D'emploi

Installation

3.3 Fitting the wrist strap

Fit the wrist strap as shown in the diagram.
3.4 SevenGo™ clip
The SevenGo™ clip is an electrode holder that can be placed next to the display on either side of the
hous ing.
a) To mount the clip, remove the cover over the clip's fixing point using your thumbnail.
b) Attach the clip by pressing it into the recess.
c) Slide the shaft of the sensor into the clip from the top.
d) Rotate the sensor around the clip's axis to switch between the storage and working positions.
3.5 SevenGo™ two-electrode clip
The SevenGo™ two­electrode clip is the ideal accessory for handling two electrodes in the field. Two
elec trode clips can be connected.
Attach the two clips by pressing them into the recesses of the clip connector.
3.6 Attaching the ErGo™
The ErGo™ protects the meter from shocks and safely stores the electrode(s). It is the perfect accessory
for carrying and measuring in the plant or field, and for working comfortably when the meter is placed on
a table or on the ground.
6 pH/ORP/Ion/DO meter SG68