Declaration Of Conformity; Installation Instructions; Safety Instructions; Scope Of Delivery - Truma CP plus Mode D'emploi

Declaration of conformity

1. Information about the manufacturer
Name: Truma Gerätetechnik GmbH & Co. KG
Address: Wernher-von-Braun-Str. 12, D-85640 Putzbrunn
2. Device identification
Type / model:
Control panel / Truma CP plus
3. Complies with the requirements of the following
EC directives:
3.1 Electromagnetic Compatibility 2004/108/EC
3.2 Radio interference in vehicles UN ECE R10
3.3 End-of-life vehicle directive 2000/53/EC
3.4 Low voltage directive (2006/95/EC)
and bears the CE symbol and the type approval number
E1 10R-046951
4. Basis of the conformity assessment
EN 61000-6-3:2007 + A1:2011, EN 61000-6-1:2007,
CISPR 25, DIN EN 60335-1
6. Signatory details
Signature: p.p. Axel Schulz
Produce Centre Manager

Safety instructions

In other countries, the relevant regulations must be observed.

Scope of delivery

1 Truma CP plus control panel
1 Screw (control panel upper section fastening bracket)
1 Set of operating and installation instructions
1 12 V connector cable 30 cm (+ = red , - = red/black)
Ordered separately:
1 Connector cable (TIN bus) available in different lengths.

Description

The control panel (with polarity reversal protection) is supplied
with voltage via a 12 V connecting cable. The control panel is
connected to a Combi CP plus ready heating and / or air con-
ditioning system with a connector cable (TIN bus).
Putzbrunn, 09.07.2013

Installation instructions

In-vehicle installations must comply with
the technical and administrative regula-
tions of the respective country of use (e.g.
EN 1648, VDE 0100-721). National regula-
tions and rules must be followed.
33