Fault; Technical Data; Maintenance; Disposal - Truma CP plus Mode D'emploi

In this case the warning is not acknowledged in the con-
trol panel, and the warning symbol remains. The control
panel remains in warning status. Other connected devices can
be operated.

Fault

In the event of a fault, the control panel immediately jumps to
the "Fault" menu level and displays the fault code of the fault.
E = Fault
41 = Fault code
H = Device
Cause eliminated / return to setting level
– Tap rotary push button.
– The respective unit is restarted.
This can take several minutes because of internal after-
run of connected units.
If the cause has not been remedied, the fault
will occur again and the control panel will jump to the "Fault"
menu level again.
Cause not eliminated / return to setting level
– Press the return button.
In this case the fault is not acknowledged in the con-
trol panel, and the warning symbol remains. The device
remains in fault state. Other connected devices can be
operated.
30
H = Heating system
A = Air conditioning system

Technical data

Display
Dimensions (L x W x H)
Operating temperature range -25 °C to +60 °C
Storage temperature range
Interface
Power supply
Power consumption
Standby current
Weight
Right reserved to make technical changes!

Maintenance

This unit is maintenance free. In order to clean the front panel,
use a damp, non-scouring cloth. If this is not sufficient, use a
neutral soap solution.

Disposal

The unit must be disposed of in line with the administra-
tive regulations of the respective country in which it is used.
National regulations and laws (in Germany, for example, the
End-of-life Vehicle Regulation) must be observed.
LCD, monochrome, with
background lighting
92 x 103 x 40 mm
-25 °C to +70 °C
TIN bus
8 V – 16.5 V
max. 65 mA (100 %
background lighting)
6.5 mA – 7 mA (Standby)
3 mA (Off)
110 g