Display And Controls; Rotary Push Button; Back Button - Truma CP plus Mode D'emploi

Display and controls

6
7
9
1 = Display
2 = Status bar
3 = Menu bar (upper)
4 = Menu bar (lower)
5 = 230 V mains supply indicator (power)
6 = Time switch display
7 = Settings / Values

8 = Rotary push button

9 = Back button

Menus can be selected in lines (3 + 4) using the rotary push
button (8) and settings made. The display takes place using a
screen (1) with an illuminated background. The Back button (9)
can be used to return from a menu.
Rotary push button
Setpoints and parameters can be selected, modified and
saved by tapping on them using the rotary push button (8).
Selected menu items flash.
1
2
- +
3
5
4
8
3 sec
Back button
Pressing the Back button (9) returns you from a menu and
discards settings. This means that the previous values are
retained.
Rotate right (+)
– Menu is run through from left to right.
– Increase values.
Rotate left (-)
– Menu is run through from right to left.
– Decrease values.
Touching
– Accept (save) a selected value.
– Select a menu item, switch to setting
level.
Press (3 seconds)
– Main switch function ON/OFF
21