Intended Use; Parts Description; Technical Data; Scope Of Delivery - LIVARNO LUX HG00375A Instructions De Montage, D'utilisation Et Consignes De Sécurité

LED Solar wall light

Intended use

The LED solar-powered wall light is intended to
illuminate outdoor areas without electrical con-
nection, e.g. garden sheds etc. The LED solar-pow-
ered wall light is not suitable for commercial use.

Parts description

Rawlplug
1
Mounting plate
2
Screws (4 x 30 mm)
3
Hanger (for HG00375B/ HG00375C only)
4
Receiver (for HG00375B/ HG00375C only)
5
Solar cell
6
Sensor
7
Battery cover
8
Battery compartment
9
Rechargeable batteries
10
ON / OFF switch
11
6 GB/IE
Screws (3.7 x 5.5 mm) (for HG00375A only)
12
Lamp Shade (for HG00375A only)
13

Technical Data

Operating voltage: 3.6 V
Rechargeable
batteries: 3 x 1.2 V
900 mAh, AAA
Light bulb: 4 LEDs, approx. 0.5 W
(LEDs not replaceable.)
Solar cell: approx. 5.5 V, approx.
100 mA
Sensor: Range: max. 5 m, detection
angle: approx. 100° hori-
zontal, approx. 90° vertical
Protection class: IP43 (spray-proof)

Scope of delivery

Check immediately after unpacking that the
parts are complete and that the product is in
proper condition.
NiMH batteries,