Introduction; Intended Use; Description Of Parts; Included Items - LIVARNO LUX HG01045 Instructions De Montage, D'utilisation Et Consignes De Sécurité

LED solar spotlight

Introduction

We congratulate you on the purchase of your new
device. You have chosen a high quality product.
The instructions for use are part of the product. They
contain important information concerning safety,
use and disposal. Before using the product, please
familiarise yourself with all of the safety information
and instructions for use. Only use the unit as de-
scribed and for the specified applications. If you
pass the product on to anyone else, please ensure
that you also pass on all the documentation with it.

Intended use

This product is suitable for outdoor use. The prod-
uct is not intended for commercial or for use in
other applications.
Not suitable for ordinary lighting in
household room illumination.
This product is suitable for extreme temperature
up to -21°C.

Description of Parts

Low voltage socket
1
Mounting hole for main station
2
Main station
3
AUTO / OFF switch
4
Locking screw (motion detector)
5
Motion detector
6
Spotlight
7
Rotary control LUX (light sensitivity)
8
Rotary control SENS (sensitivity)
9
Rotary control TIME (switched on duration)
10
Solar electricity socket
11
Screw (ø 4.5 x 40 mm)
12
Solar cell
13
Screw (ø 3.7 x 28 mm)
14
Solar cable plug
15
Mounting holes for solar cell
16
6 GB/IE
Wall bracket
17
Dowel (ø 8 mm)
18
Signal LED
19
Lead gel rechargeable battery
20
Dowel (ø 6 mm)
21

Included items

Immediately after unpacking, check that all the
items and accessories are present and that the
device is in perfect condition.
1 Main station (consists of spotlight with 10 LEDs,
motion detector, battery housing with built-in
rechargeable battery)
1 Solar cell (incl. approx. 4.75 m power cable)
2 Screws (mounting material for main station,
ø 4.5 x 40 mm)
4 Screws (mounting material for solar cell,
ø 3.7 x 28 mm)
2 Dowel (mounting material for main station,
ø 8 mm)
4 Dowel (mounting material for solar cell, ø 6 mm)
1 Wall bracket
1 Operating instructions

Technical data

Operating voltage:
Lead gel rechargeable
battery:
Lamp:
Solar cell:
Connection for
charging device:
Dimming switch:
12 V
6 V , 4 Ah, dimensions:
10 x 7 x 4.5 cm
10 LEDs, 0.5 W
150 x 200 mm,
amorphous, 2 Wp,
max. 10 V , 140 mA
12 V , min. 400 mA,
polarity , DC con-
nector 5.5 x 2.1 mm
(charging device not
included with delivery.)
Adjustable from approx.
10 lx–20,000 lx