Scope Of Delivery; Technical Data; Visual Inspection - Mesto 3615S Mode D'emploi

EN
+
You will find the illustrations referred to above in the pages 2 – 5 of these
instructions for use.

Scope of delivery

Tank [1] with pump [2], shut-off valve [3], hose [4], instructions for use [5], spray wand [6]
(Fig. 1)

Technical data

Type
Max. filling amount
Total contents
Max. spraying pressure
Max. operating temp-erature
Weight when empty
Material of tank
Where device is carried
Technical residual quantity
Max. volume flow
Recoil force
Table 1
Assembly
Screw the spray wand [6] onto the shut-off valve [3] (Fig. 2)
Checks

Visual inspection:

sure gauge [16] and spray wand [6] undamaged? (Figs. 1, 10)
+
Pay special attention to the connections between the tank – hose and hose – shut-off
valve and to the condition of the pump thread and hose.
No leaks: Pump up the empty device to 2 bar.
► The pressure must not decrease more than 0.5 bar within 30 minutes.
Function: Pull the red button on the safety valve [13]. (Fig. 3)
► The pressure must dissipate.
+
Using the wheel lock [40] the lever on the shut-off valve [3] can be locked and unlo-
cked. Unintentional spraying is prevented after locking. (Fig. 11)
► If required, reset the wheel lock [40] and activate the shut-off valve [3]. (Fig. 11)
► The shut-off valve must open and close.
Have damaged parts or parts that do not work properly repaired immediately by our
customer service department or by service partners authorized by us.
Stainless steel with polyethylene inner tank
on the back (optional accessories7121M)
Are the tank [1], pump [2], hose [4] with shut-off valve [3], pres-
15
3615S, 3615SE
10 l
13 l
6 bar
50 °C
5,7 kg
Manual
0,03 l
4,52 l/min
< 5 N
ENGLISH