Table des Matières
Publicité
Using an SD Card
You can use a microSD/microSDHC card in addition to the internal memory.
Use this unit to format a new SD card (➜ page 53) before use.
Inserting the SD card
1
Turn off the power and
open the SD card slot
cover.
2
Insert the SD card and
close the SD card slot
cover.
Align the SD card in the
correct direction ( ) and
insert it fully until a "click"
sound is heard.
To remove the SD card:
Turn off the unit power and
1
open the SD card slot cover.
Gently push the SD card.
2
When the SD card protrudes
3
slightly, slowly pull the card
out.
*
This unit is compatible with 2 GB microSD cards, and
4 GB to 16 GB microSDHC cards. (As of June 2011)
*
This unit may not operate correctly depending on the
manufacturer or type of SD card.
*
For details on SD cards that are confirmed to operate
correctly according to our manufacturing standards, see
Pull towards yourself,
the support site below.
then open upwards.
http://panasonic.net/support/
*
If an SD card is inserted but "microSD" is not displayed
on the SELECT FOLDER screen, etc., this unit does not
recognise the SD card. Turn off the power and reinsert
Terminal side
down
the SD card.
Terminal
*
You can switch between the internal memory and SD
side
card by pressing [F2 (FOLDER)] for more than 1 second
when the stopped screen is displayed.
*
Keep the Memory Card out of reach of children to
prevent swallowing.
1
2
3
ENGLISH
39
39
Publicité
Table des Matières
