Table des Matières
Publicité
Using the timer
g Checking the timer condition or execution
state
Timer indication
: Timer is set. The display flashes when the timer is
executed.
: When the repeat settings are "ONCE", this is displayed
if the timer recording fails. To clear the display, change
the settings to "OFF", or set the timer again.
: When the repeat setting is "DAILY" or "SELECT", this
is displayed if the timer recording (playback) fails. If the
next timer operates normally, this display disappears.
*
When the timer scheduled time comes, the scheduled
operation is performed. If the unit has been off before the
scheduled operation, the power is turned on and the timer
operation is performed. The power is turned off at the timer
end time. When the power is off at timer playback time, the
file playback starts a little behind the scheduled time.
*
When the scheduled time arrives while the unit is on
• Timer playback will not be performed. (excluding the
case when the unit is stopped)
• Timer recording will be performed. However, if
recording is in progress at the scheduled time, the
recording takes priority and the timer recording is not
performed.
*
During timer recording (playback), operations other than
50
stop operation, power operation and volume adjustment
cannot be performed.
50
*
After setting the file to be played for timer playback, if
the set file is deleted, the alarm sounds for approx. 30
seconds at the timer start time.
*
When the file length of the specified file is shorter than
the period from timer start time until timer end time,
the timer playback is stopped before the timer end time
set for the timer playback. (If the repeat setting is set to
items other than "OFF", the selected file is repeatedly
played back with 1 track repeat until the end time.
*
When the file playback is assigned as playback source,
the files are played back at the scheduled time with
the playback settings (SOUND EQ (➜ page 38) etc.)
which have already been set when the timer playback
setting was made. Repeat play (➜ page 36) at the timer
playback is 1 track repeat playback regardless of the
setting contents. (excluding the case when the repeat
setting is OFF)
*
When MIC or LINE is assigned as recording source,
the recording is made at the scheduled time with the
recording settings (microphone sensitivity (➜ page 21),
the line input setting (➜ page 30), etc.) which have
already been set when the timer recording setting was
made. (excluding the recording mode (➜ page 20))
*
If the clock setting (DATE & TIME) is returned to the
factory setting, the timer operation setting (SETTING) is
automatically turned OFF.
*
1 minute before the timer recording start time, the
recording indicator blinks, and the mode switches to
recording standby.
Publicité
Table des Matières
