Table des Matières
Publicité
Using an SD Card
You can use a microSD/microSDHC card in addition to the internal memory.
Use this unit to format a new SD card (➜ page 60) before use.
Inserting the SD card
1
Turn off the power
and open the battery/
SD card slot cover.
2
Insert the SD card and
close the battery/SD
card slot cover.
Align the SD card in the
correct direction ( ) and
insert it fully until a "click"
sound is heard.
To remove the SD card:
Turn off the power and
1
open the battery/SD card
slot cover.
Gently push the SD card.
2
When the SD card
3
protrudes slightly, slowly
pull the card out.
46
46
*
You can switch between the internal memory and SD
card by pressing [F2 (FOLDER)] for more than
1 second when the stopped screen is displayed.
*
This unit is compatible with 2 GB microSD cards, and
4 GB to 32 GB microSDHC cards. (As of May 2012)
*
This unit may not operate correctly depending on the
manufacturer or type of SD card.
*
For details on SD cards that are confirmed to operate
correctly according to our manufacturing standards,
see the support site below.
Terminal side
http://panasonic.net/support/
down
*
If an SD card is inserted but "microSD" is not displayed
Terminal
side
on the SELECT FOLDER screen, etc., this unit does
not recognise the SD card. Turn off the power and
reinsert the SD card.
*
Keep the Memory Card out of reach of children to
prevent swallowing.
Publicité
Table des Matières
