Turning The Power On/Off/Hold Function - Panasonic RR-XS410 Mode D'emploi

Turning the Power ON/OFF/Hold function

ON / OFF OPR HOLD
OPR/HOLD switch
Turning the power ON:
Slide the OPR/HOLD switch to [ON/OFF] side to turn the
power on. Then, the display lights on.
Set the current date and time when turning this unit on
for the first time. (➜ page 10)
Turning the power OFF:
Slide and hold the OPR/HOLD switch to [ON/OFF] side for
1 second or more.
g About the battery indicator
The remaining battery level is displayed as below while
this unit is operating.
* If the battery runs out, "
or charge the rechargeable battery as soon as possible.
* Please replace battery within approx. 1 minute for
preservation of the clock data.
* Depending on the battery status or the operation
content to use, even if the power turns off due to the
battery exhaustion, this unit may be used for a while if
turned on again. However, the unit may suddenly turn off
during operation due to the low level of battery.
Blinking
" blinks. Replace the battery
* Some level of battery is required when recording, or
performing Deleting files (➜ page 17), Dividing files
(➜ page 44), Deleting index (➜ page 33), FORMAT
(➜ page 53). If the battery indicator shows "
(blinking) and these operations are performed, the
power turns OFF due to the battery exhaustion.
g Auto power off
The power automatically turns off after a preset time (the
factory setting is 15 minutes) elapses while recording is
paused or stopped. (➜ page 52)
g Using the Hold function
Button operations are ignored when you set Hold on.
Slide the OPR/HOLD switch to [HOLD] side during
recording or playback.
* When the Hold function is on, button operation is
ignored even if the unit is on ("HOLD ON" is displayed).
Accordingly, operation mistakes (i.e. Recording or
playback stopping midway) can be prevented.
ENGLISH
"
9
9