Using The Timer - Panasonic RR-XS410 Mode D'emploi

Using the timer

Audio can be recorded at the set date and time. The timer can also be used as an alarm
by playing back files or sounds. Set the clock correctly beforehand. (➜ page 10)
• Press [g STOP/RETURN] to stop the unit.
g STOP/RETURN
F2
MENU
To exit the setting screen, press
[F2 (CLOSE)].
48
48
1
Press [MENU].
2
Press +, – to select "COMMON
MENU" and press [q OK] to enter.
3
Press +, – to select "TIMER &
ALARM" and press [q OK] to enter.
4
Set items such as
the date and time,
and sound source.
For details on the items,
see page 49.
Press +, – to select the item and press
1
[q OK] to enter.
Press +, –, u, i to select the setting
2
and press [q OK] to enter.
Repeat steps and
1 2
settings.
5
Press +, – to select "OK" and press
[q OK] to enter.
*
*
to complete the
Be sure to perform the "OK" operation in
5
step . If this operation is not performed,
the timer will not operate correctly. If a button
such as [F2 (CLOSE)] is pressed while setting
the timer, "REGISTER SETTING?" may be
displayed. Select "YES" or "NO" and press
[q OK] to enter.
The sound volume at the timer playback is the
same volume as when the timer was set.
Set the appropriate sound volume before
setting the timer.