Transportation And Storage; Inspect The Delivery; Transportation Guidelines; Storage Guidelines - Xylem LOWARA ResiBoost MMW Manuel D'installation, D'utilisation Et D'entretien

en - Original instructions
7. Notified body:: ---
8. Additional informa- Standard Category C1, Cat-
tion: (*) egory C2 for version (A1).
Signed for and on be- Xylem Service Italia S.r.l.
half of:
Montecchio Mag-
giore, 20.12.2018
Amedeo Valente
(Director of Engineer-
ing and R&D)
Rev. 00
1.7 EU Declaration of Conformity (RoHS)
1. Unique identifica- MMW/MTW/MMA/MTA
tion of the EEE: No.
2. Name and address Xylem Service Italia S.r.l.
of the manufacturer:
Via Vittorio Lombardi 14
36075 Montecchio Maggiore
VI
Italy
3. This declaration of conformity is issued under the
sole responsibility of the manufacturer.
4. Object of the dec- Control device ResiBoost
laration: with variable speed driver
(frequency converter) for
electric pumps (see label on
first page)
5. The object of the declaration described above is
in conformity with Directive 2011/65/EU of the Euro-
pean Parliament and of the Council of 8 June 2011
on the restriction of the use of certain hazardous
substances in electrical and electronic equipment.
6. Harmonised stand- Technical specifications
ards used: - used: -
7. Additional informa-
tion: -
Signed for and on be- Xylem Service Italia S.r.l.
half of:
Via Vittorio Lombardi 14
Italy
Montecchio Mag-
giore, 30.07.2015
Amedeo Valente
(Director of Engineer-
ing and R&D)
Rev. 00
Lowara is a trademark of Xylem Inc. or one of its
subsidiaries.

2 Transportation and Storage

2.1 Inspect the delivery

1. Check the outside of the package.
2. Notify our distributor within eight days of the de-
livery date, if the product bears visible signs of
damage.
26
3. Open the carton.
4. Remove packing materials from the product.
Dispose of all packing materials in accordance
with local regulations.
5. Inspect the product to determine if any parts
have been damaged or are missing.
6. Contact the seller if anything is out of order.

2.2 Transportation guidelines

Precautions
WARNING:
• Observe accident prevention regula-
• Crush hazard. The unit and the com-
Check the gross weight that is indicated on the
package in order to select proper lifting equipment.
Position and fastening
The unit must be transported only in its horizontal
position as indicated on the package. Make sure that
the unit is securely fastened during transportation
and cannot roll or fall over. The product must be
transported at an ambient temperature from -10°C to
™
70°C (14°F to 158°F) with a non-condensing humidi-
ty of <95% and protected against dirt, heat source,
and mechanical damage.

2.3 Storage guidelines

2.3.1 Storage location
NOTICE:
• Protect the product against humidity, dirt, heat
sources, and mechanical damage.
• The product must be stored at an ambient tem-
perature between 10°C and 70°C (14°F and
158°F) and a non-condensing humidity below
95%.
• The converter uses electrolytic capacitors which
can deteriorate when not used for a long period
of time. If storing for a year or more, make sure
to run them occasionally to prevent deterioration.

3 Product Description

3.1 Product overview

™
ResiBoost is a variable frequency driver (convert-
er) intended to be used with an electric pump for
constant pressure systems.
Not suitable for drainage systems with/without level
control.
A water system is only occasionally required to run
at maximum capacity and the amount of water with-
drawn varies over time.
™
ResiBoost automatically controls the speed of the
electric pump while keeping the pressure in the sys-
tem constant in relation to the signal of the pressure
transmitter (sensor).
3.2 Product denomination
tions in force.
ponents can be heavy. Use proper
lifting methods and wear steel-toed
shoes at all times.