Xylem LOWARA ResiBoost MMW Manuel D'installation, D'utilisation Et D'entretien page 25

1 Introduction and Safety
1.1 Introduction
Purpose of this manual
The purpose of this manual is to provide necessary
information for:
• Installation
• Operation
• Maintenance
CAUTION:
Read this manual carefully before instal-
ling and using the product. Improper use
of the product can cause personal injury
and damage to property, and may void
the warranty.
NOTICE:
Save this manual for future reference, and keep it
readily available at the location of the unit.
1.2 Safety terminology and symbols
Hazard levels
Hazard level
DANGER:
WARNING:
CAUTION:
NOTICE:
Hazard categories
Hazard categories can either fall under hazard levels
or let specific symbols replace the ordinary hazard
level symbols.
Electrical hazards are indicated by the following spe-
cific symbol:
Electrical Hazard:
Hot surface hazard
Hot surface hazards are indicated by a specific sym-
bol that replaces the typical hazard level symbols:
CAUTION:
Indication
A hazardous situation
which, if not avoided, will
result in death or serious
injury
A hazardous situation
which, if not avoided,
could result in death or
serious injury
A hazardous situation
which, if not avoided,
could result in minor or
moderate injury
• A potential situation
which, if not avoided,
could result in unde-
sirable conditions
• A practice not related
to personal injury
1.3 Inexperienced users
WARNING:
This product is intended to be operated
by qualified personnel only.
Be aware of the following precautions:
• This product is not to be used by anyone with
physical or mental disabilities, or anyone without
the relevant experience and knowledge, unless
they have received instructions on using the
equipment and on the associated risks or are su-
pervised by a responsible person.
• Children must be supervised to ensure that they
do not play on or around the product.
1.4 Warranty
For information about warranty, see the sales con-
tract.
1.5 Spare parts
WARNING:
Only use original spare parts to replace
any worn or faulty components. The use
of unsuitable spare parts may cause
malfunctions, damage, and injuries as
well as void the guarantee.
For more information about the product's spare
parts, refer to the Sales and Service department.
1.6 EU Declaration of Conformity (No LVD/
EMCD37)
1. Apparatus model/ see adhesive on the first
Product: page
2. Name and address Xylem Service Italia S.r.l.
of the manufacturer:
Via Vittorio Lombardi 14
36075 Montecchio Maggiore
VI
Italy
3. This declaration of conformity is issued under the
sole responsibility of the manufacturer.
4. Object of the dec- with variable speed driver
laration: (frequency converter) for
electric pumps (see label on
first page)
5. The object of the declaration described above is
in conformity with the relevant Union harmonisation
legislation:
• Directive 2014/35/UE of 26 February 2014
(electrical equipment intended for use within
certain voltage limits)
• Directive 2014/30/UE of 26 February 2014
(electromagnetic compatibility)
6. References to the relevant harmonised stand-
ards used or references to the other technical spec-
ifications, in relation to which conformity is de-
clared:
• EN 60730-1:2011, EN 60730-2-6:2008, EN
61800-5-1:2007+A1:2017
• EN 60730-1:2011, EN 60730-2-6:2008, EN
61800-3:2004+A1:2012 (*)
en - Original instructions
25