Maximum Output; Guarantee; Manufacturer's Responsibility - Anthogyr IMPLANTEO LED Manuel D'utilisation

52
The IMPLANTEO®is intended to be used in the electromagnetic environment in which radiated RF disturbances are controlled.
The customer or the user of the IMPLANTEO®can help to prevent electromagnetic interference by keeping a minimum distance
between the portable and mobile RF communications device (emitters)and the IMPLANTEO®, as recommended below, according to
the maximum emission power of the communications device.

Maximum output

power assigned
for the emitter W
0,01
0,1
1
10
100
For emitters whose maximum emission power assigned is not given above, the recommended separation distance d in meters
(m) can be estimated by using the equation applicable to the frequency of the emitter, where P is the characteristic of the power of
maximum emission of the emitter in watts (W), according to the manufacturer of the latter.
NOTE 1 : to 80 MHz and at 800 MHz, the separation distance for the highest frequency range applies.
NOTE 2 : these directives do not apply in all situations. Electromagnetic propagation is affected by absorption and by the reflections
of structures, objects and individuals.
13. Garantee
12 month GUARANTEE.
• This device is guaranteed parts and labour against all manufacturing defects for 12 months from the date of invoice.

GUARANTEE

• This guarantee does not apply to wear and tear parts.
12
• All changes or additions to the product without the express agreement of Anthogyr render this guarantee null and void.
months
• The guarantee becomes null and void if the technical instructions are not followed.
• Anthogyr cannot be held responsible for damage resulting from or which could result from normal wear, use, cleaning or incorrect
maintenance, the non-observance of instructions for use or connection, scaling or corrosion, impurities in the water supply system or unusual
chemical or electrical influences or non observance of the instructions, maintenance instructions and assembly of Anthogyr and other
manufacturer's instructions.
• Delivery charges incurred when sending an instrument back to Anthogyr for repair will be paid by the client, even if the repair itself is
covered by the guarantee.
• Postage and packing fees when returning the instrument to the client are covered by the guarantee.
• So that guarantee requests are taken into consideration, please attach a copy of the invoice or a copy of the delivery slip to the device.

14. Manufacturer's responsibility

This leaflet does not substitute leaflets for peripheral products.
The manufacturer reserves the right to change the device and/or the user manual without warning.
E
The following points, if they are not followed, relieve Anthogyr of the responsibility :
w All the manufacturer's recommendations must be followed during installation (network voltage,
electromagnetic environment...).
w The device must be used in an electrical facility compliant with current regulations.
Recommended separation distances between portable
and mobile RF communications devices and the IMPLANTEO®
Separation distance according to the frequency of the emitter (m)
From 150 kHz to 80 MHz
d=1,2√P
0,12
0,38
1,2
3,8
12
From 80 MHz to 800 MHz
d=0,4√P
0,04
0,13
0,4
1,3
4
From 800 MHz to 2,5 GHz
d=0,7√P
0,07
0,22
0,7
2,2
7