Home Theatre Macro Function - Marmitek PowerMid Plus Mode D'emploi

ENGLISH
NOTES FOR LEARNING YOUR REMOTE:
Make sure you have new batteries in both remotes before learning.
Take care not to move either remote while pressing the buttons.
No functions may be stored under the Learn, Setup, TV, VCR, CBL,
SAT, CD, PC, M1, M2, ShowView/V+, X-10 and Enter keys or directly
under the SHIFT key.
Experiment by learning 2 or 3 keys initially (to ensure compatibility)
and then clear the stored learned commands before completely learn-
ing your original remote's keyboard.
When memory is full , the LED will flash for three seconds. It is not
possible to learn any additional keys without clearing a Mode first
(please refer to 'clearing learned commands to free up memory')
Experiment with the distance between the remotes if you have a prob-
lem learning.
Some remotes do not have their IR sender LED in the centre so you
might need to experiment with the side-to-side position of the remotes
relative to each other.
Avoid direct sunlight, under a fluorescent or incandescent lamp while
teaching the Marmitek MultiMedia Remote.
Use buttons L1 and L2 to learn codes for which the Marmitek
MultiMedia Remote does not have a corresponding button.
If you have problems in learning keys, try clearing the memory and try
learning them again.

HOME THEATRE MACRO FUNCTION

Your MultiMedia Remote has two Macro keys; M1 and M2. You can
program these key to execute a series of commands with one press
of that button. This powerful feature is ideal for switching on all your
audio and video equipment or choose a preferred setting of your
Home Theatre System.
PROGRAMMING THE MACRO KEYS M1 AND M2
1. Press and hold SETUP until the LED indicator lights steadily.
Release the SETUP button.
2. Press the Macro key you want to program
3. Press the keys on your MultiMedia Remote which you want to
store under the Macro key (the maximum is 14 commands). The
order of programming is also the order of execution of the Macro.
4. To store the Macro, press the Macro key once more. When you
have reached the maximum of 14 commands, the Macro program-
ming mode is automatically ended and the 14 commands stored.
NOTE FOR PROGRAMMING MACRO'S:
The Macro keys can execute both Infrared and Radio commands. This
allows you to switch on audio and video equipment and control lights
simultaneously (using optional Marmitek X-10 modules). Ideal for Home
Theatre applications. Go to www.marmitek.com for more information.
10
DELETING COMMANDS UNDER A MACRO KEY
1. Press and hold SETUP until the LED indicator lights steadily.
Release the SETUP button.
2. Press the Macro key you want to delete.
3. Press the SETUP key once more.
CONTROLLING YOUR HOME USING MARMITEK X-10 HOME
AUTOMATION MODULES
The Marmitek MultiMedia Remote allows you to control practically
everything electrical in your home. Besides Infrared technology that
lets you control all your TV, VCR, Cable and Satellite equipment it has
X-10 Radio technology that lets you control lamps and appliances
anywhere in your home remotely.
HERE ARE JUST SOME OF THE THINGS YOU CAN DO WITH
YOUR MARMITEK MULTIMEDIA REMOTE USING THE MARMITEK
X-10 FEATURE:
• Turn on, off or dim lights while watching TV
• Start the coffee machine from your bedroom when you wake up
• Turn on lights at night to scare away intruders if you hear a noise
• Turn on your electric blanket before the movie ends, so it's nice
and warm to go to bed
To control your lamps and appliances you need Marmitek X-10 Home
Automation Modules, which plug into the existing wall sockets. No
extra wiring is needed. Ask your dealer for more information.
CONTROLLING MARMITEK X-10 MODULES
You can control the Marmitek X-10 Modules as follows:
1. Press and release the Marmitek X-10 button [yellow house].
2. Use the number buttons to enter the Unit Code number of the chosen
Module (You do not need to enter '0' first for a single digit number).
3. Press the appropriate button for the function you require (see
below).
MARMITEK X-10 FUNCTIONS:
On: CHANNEL +
Off: CHANNEL -
Bright: VOLUME +
Dim: VOLUME -
All Lights On: Power
All Units Off: Mute
CHANGING THE X-10 HOUSE CODE
The Marmitek MultiMedia Remote defaults to House Code A, and in
most cases you will not need to change this unless you are experi-
encing interference form a neighbouring X-10 system.
1. Press and release the Marmitek X-10 button [yellow house]
2. Press and hold SETUP until the LED indicator lights steadily.
Release the SETUP button.
3. Use the number button to enter the number equivalent to the cho-
sen House Code (1=A, 2=B, .... 16=P).
4. Press the ENTER button to confirm the House Code. The LED
turns off.
ENGLISH
11