Marmitek PowerMid Plus Mode D'emploi page 3

2
5
6
7
10
16
17
18
21
4
INTRODUCTION
The Marmitek MultiMedia Remote will control most video and audio
equipment. It replaces up to six existing remotes so you just need one
remote to control all of your equipment. On top of that this remote can
also control lights and appliances anywhere in your home when used
with Marmitek X-10 Home Automation Modules. When using the
(optional) Marmitek Powermid receiver, you now can control your
Audio and Video equipment from any room in your house. When
using the (optional) Mouse Remote Receiver, you can even control
your PC. In addition to all these unique features, it is an easy to use
universal remote. It is pre-programmed in the factory for most brands
1
and models of equipment. Simply enter the code for your equipment
and your remote is ready to use. If you want to add more commands,
the remote is capable of learning the IR commands of almost any
4
infrared remote control.
HOW TO INSTALL THE BATTERIES
3
1. Push the tab of the battery compartment on the reverse side of
your remote, and lift the cover.
9
2. Install four fresh AAA batteries, taking care to match the + and -
marks in the battery compartment.
8
SETTING UP YOUR MARMITEK MULTIMEDIA REMOTE
Button Descriptions:
11
[1] Indicator light (LED):
The indicator light flashes when the remote is operating.
12
[2] Power:
Works in the same way as your original remote. Also used to switch
all Marmitek X-10 Lamp Modules on.
13
[3] Set-up:
Used for entering code numbers matching your TV, VCR or other
14
equipment.
[4] Learn:
15
Lets you learn IR commands from an existing remote that might not
be in the Marmitek 8in1 library.
[5] VCR, TV, SAT, DVD, CBL, CD
19
Used to select the device to control. CBL = Decoder, VCR = Video
[6] PC
20
In combination with the (optional) Mouse Remote Receiver, pressing
this key allows you to control MP3, DVD and CD functions on your
PC. Ask your dealer for more information or go to www.marmitek.com.
23
[7] SHIFT
Secondary functions for pre-programmed codes. You may have some
22
functions on your original Remote, which do not appear on the keypad
of the Marmitek MultiMedia Remote. This does not mean that they are
not available. You may access them via the SHIFT key. If you miss a
function, press the shift button once, and find the function you need
by pressing the buttons. In the Shift mode, the LED is on continuously.
To end the Shift mode press the SHIFT key once more. The SHIFT
key can also be used to learn another function under the same key.
ENGLISH
5