Pictorial Diagrams On The Equipment; Symbols Used In The Instructions; General Safety Information - Grizzly ERM 1436 G Traduction De La Notice D'utilisation Originale

GB
Pictorial Diagrams on the
Equipment
Caution!
Read the operating instructions
carefully.
Wear eye and ear protection.
Do not expose the equipment to
the damp. Do not work in the rain
and do not cut wet grass.
Risk of injury from parts being
thrown up.
Keep nearby people away from
the mower.
Caution � sharp cutting blade!
Keep feet and hands away. Risk
of injury!
Switch off the motor and discon-
nect the plug before adjustment
or repair work or if the power ca-
ble is caught or damaged.
Danger of damaged power cable.
Keep the power cable away from
the cutting blade!
Caution!
The lawnmower blade continues
to run after switching off.
Cutting circle
Noise level specification L
L
WA
dB.
dB
Protection class II
40
Symbols used in the instruc-
tions

General Safety Information

Preparation:
• This equipment is not intended for
use by people (including children) with
limited physical, sensory or intellectual
abilities or lack of experience and/or lack
of knowledge, other than with the super-
vision of a person responsible for their
safety or with the instruction of the same
in terms of how to use the equipment.
in • Do not allow the use of this equipment
wa
by children or others who are unfamil-
iar with these operating instructions.
Local regulations may specify the
minimum age of the operator.
• Do not use the equipment when peo-
ple and particularly children or pets
Do not dispose of electrical
equipment in domestic waste.
Hazard symbols with informa-
tion on prevention of personal
injury and property damage.
Precaution symbol (explanation of
precaution instead of exclamation
mark) with information on prevention
of harm / damage.
Notice symbol with information on
how to handle the device properly.
This equipment may cause serious
injury in the case of improper use. In
order to avoid injury to people and
damage to property, the following
safety information must be observed
and users must familiarise them-
selves with all operating parts.