General Description; Function Description; Summary; Assembly - Grizzly ERM 1436 G Traduction De La Notice D'utilisation Originale

authorised by the manufacturer are
used.
Electrical Safety:
• Ensure that the mains voltage match-
es the specifications on the rating
plate.
• If possible, connect the equipment only
to a socked with a residual current-
operated protective device (RCD) with
a release current of more than 30 mA.
• Avoid bodily contact with earthed
parts (e.g. metal fences, metal posts).
• Use only authorised power cables of
type H05VV-F or H05RN-F, which are
no more than 75 m long and suitable for
outdoor use. The power cable wire cross
section must be at least 1.5 mm
completely unroll cable drums before
use. Check the cable for damage.
• To fix on the power cable, use the cable
suspension intended for the purpose.
• Keep the power cable away from the
cutting tool when working. The cutting
blades may damage the power cable and
result in contact with live parts. Always
run the power cable behind the operator.
• Do not use the power cable to pull the
plug from the socket. Protect the power
cable from heat, oil and sharp edges.
• Switch off the equipment and discon-
nect the plug from the socket if the
power cable is damaged. If the power
cable is damaged, it must be replaced
by the manufacturer, the customer
services of the same, or a qualified
person, in order to avoid hazards.
• Do not connect a damaged power cable
to the mains. Do not touch a damaged
power cable when it is connected to the
mains. A damaged power cable may
result in contact with live parts.

General Description

Function Description

The electric lawnmower has a cutting tool,
which turns parallel to the cutting level. It is
equipped with a high performance electric
motor, robust plastic housing, safety switch,
collision guard, and grass box. Additionally,
the equipment is height adjustable to three
levels and has smooth-running wheels.
For the function of the operating parts,
please refer to the descriptions below.
. Always
2

Summary

A
10 Release button
11 Cable strain relief
12 Start lever

Assembly

Assembling the Curved Handle

B
2. Fix the bar (3) using the en-
The illustration how to handle the
appliance can be found on the
pages 2-3.
1 Curved handle
2 Wing nuts
3 Lower bar
4 Grass box
5 Wheels
6 Lawnmower housing
7 Collision guard
8 Cable holder
9 Power cable outlet
Disconnect the plug before any
work on the equipment. There is a
risk of injury.
1. Insert the lower bar (3) into the slot
on the lawnmower housing (6).
GB
43