The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning: The vibration emission
value may diff er during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Safety precautions aimed at pro-
tecting the user should be based
on estimated exposure under
actual usage conditions (all parts
of the operating cycle are to be
considered, including, for example,
times during which the power tool is
turned off and times when the tool
is turned on but is running idle).
Safety Information
This section covers the basic safe-
ty regulations when working with
the electric lawnmower.
Pictorial Diagrams on the
Equipment
Caution!
Read the operating instruc-
tions carefully.
Wear eye and ear protec-
tion.
Do not expose the equip-
ment to the damp. Do not
work in the rain and do not
cut wet grass.
Risk of injury from parts be-
ing thrown up.
Keep nearby people away
from the mower.
Caution – sharp cutting
blade! Keep feet and hands
away. Risk of injury!
Switch off the motor and
disconnect the plug before
adjustment or repair work
or if the power cable is
caught or damaged.
Danger of damaged power
cable.
Keep the power cable
away from the cutting
blade!
Caution!
The lawnmower blade con-
tinues to run after switching
off .
Noise level specifi cation L
94
in dB.
Protection class II
Do not dispose of electri-
cal equipment in domestic
waste.
Cutting circle
Symbols used in the
instructions
Hazard symbols with in-
formation on prevention of
personal injury and prop-
erty damage.
GB
WA
61