Angelcare AC201 Guide De L'utilisateur page 9

Installing Batteries in Parent Unit
To insert batteries, remove the battery cover on
the bottom of the unit.
The Parent Unit requires four AAA (LR03) batteries
(not included). To insert batteries, remove the bat-
tery cover on the back of the unit and insert the
batteries matching positive (+) to positive (+) and
negative (-) to negative (-) and replace the battery
cover.
Replace the batteries when the Low Battery
Indicator flashes and turns orange instead of
green.
IMPORTANT: Use only the AC adapters included
with your monitor. Do not use these adapters with
any other equipment.
Insert the AC adapter into the jack marked "9V
(6LR61)" and plug the adapter into an electrical
outlet. Unit will run off of the AC adapter unless
there is a power outage, in which case the unit will
begin using the batteries.
9