Special Features - Angelcare AC201 Guide De L'utilisateur

Special Features

Movement Sensitivity Adjustment
The movement sensitivity adjustment dial has been preset to a level which will suit most sit-
uations. The highest sensitivity level is 5 (most sensitive) and the lowest sensitivity level is 1
(least sensitive).
You may get false alarms if your baby is in a very deep sleep or has moved to the edge of the crib. If you get
false alarms due to these circumstances, you should increase the sensitivity level by using the sensitivity dial
on the back of the Nursery Unit.
NOTE: Adjust the sensitivity level if you receive false alarms and you have followed the advice in the
Troubleshooting section for false alarms. Make a note of the position of the sensitivity dial before you change
it should you wish to return to that setting.
To increase the sensitivity level, start by increasing it by half a level. For example, if the level is currently at
2.5, increase it to 3. Use the monitor as you normally would. If you still experience false alarms, increase it by
another half level. If you are still experiencing false alarms when you have reached level 5, please consult our
customer service link on our website at www.angelcare-monitor.com
Because the Sensor Pad may detect movement from many sources from both inside and outside your baby's
room, be sure all vibration sources are eliminated before changing the movement sensitivity level. Check to
see if the Sensor Pad is resting on a flat, firm surface. Place the crib near a solid supporting wall and away
from strong air currents. Do not use crib mobiles or accessories that may cause vibrations. Avoid contact with
the crib when monitor is in use.
To make sure you have avoided all external sources of vibration, take your baby out of the crib while the mon-
itor is on. If the alarm does not sound after you take your baby out of the crib, the sensitivity level may need
to be decreased. To decrease the sensitivity level, adjust by half a level by going from 2.5 to 2. If you are still
experiencing this problem when the level is set to 1, please consult our customer service link on our website
at www.angekcare-monitor.com
Sound Lights
The Parent Unit features Sound Lights so you can "see" your baby's sounds if background noise prevents you
from hearing your baby. As the sounds get louder, more lights illuminate.
Optional "Tic" Feature
When the "Tic" feature is selected, the Parent Unit will continuously tick as your baby's movement is detected by
the Sensor Pad. If no movement is detected, the ticking will stop. If you do not want to hear the ticking, slide
the switch to the "Tic Off" position.
Movement Indicators
The Movement Indicator Light is located only on the Nursery Unit. When the Nursery Unit is set to "Sound &
Movement" or "Tic Off," the Movement Indicator Light will flash green with your baby's every movement. The
flashing green light will let you know that movement is being detected. This will allow you to check on your
sleeping baby in the dark without disturbing.
14