Presser Foot And Accessory Definitions - ELNA eXperience 660 Mode D'emploi

25
29
28
30
27
26
Machine Box
25. Instruction book
26. Power supply cord
27. Foot control
28. Knee lifter
29. Carrying bag
30. Quilt table

Presser Foot and Accessory Definitions

A: Standard Metal Foot
This foot comes attached to your machine. It is mainly
used for straight stitches and zigzag stitches longer than
1.0. The button locks the foot in a horizontal position
helping to sew over multiple layered seams.
B: Buttonhole Foot
Sew oversized buttonholes for novelty buttons or a
decorative accent. The two cutout grooves on the
underside of the foot ensure that the buttonhole sides lie
parallel to each other.
C: Overlock Foot
Prevent fabric edges from raveling by finishing the edge
with a zigzag stitch. The wires/brush on the foot help the
stitch lie flatter and reduce puckering. Use with medium
weight fabrics.
D: Hemmer Foot
Insert the fabric into the spiral on this foot. The spiral
rolls the fabric, creating a rolled hem. An easy,
professional way to sew hems.
E: Zipper Foot
Use when sewing zippers into place. The grooves on the
underside ensure the foot glides over the zipper coil.
Attach either to the left or right of the needle to sew each
side of the zipper.
5