Raising Or Lowering The Presser Foot; Removing The Presser Foot; Attaching The Presser Foot; Adjustment Of Foot Pressure - ELNA 664 Mode D'emploi

2
2
4
3
1
2
N
3
1
2
All manuals and user guides at all-guides.com

Raising or Lowering the Presser Foot

By raising or lowering the presser foot lifter, the
presser foot goes up or down.
* While in operation, keep the presser foot lowered
Thread tension will be released when the presser
1
foot lifter is raised.

Removing the Presser Foot

1
1. Turn off the power switch and unplug the
2. Raise the needle and the presser foot.
3. Press the lever located on the back of the foot

Attaching the Presser Foot

1. Turn off the power switch and unplug the
3
2. Place the presser foot so that the pin on the foot
3. Lower the foot holder to lock the foot into place.
4. Raise the presser foot lifter to check that the

Adjustment of Foot Pressure

It is not necessary to adjust the presser foot's
pressure for normal sewing.
When you sew heavy or lightweight fabrics, turn the
adjusting dial:
–– backward for heavyweight fabric.
–– foeward for Iightweight fabric.
* For normal sewing, set the adjusting dial at "N".
16
except when threading the machine or test
running without threads.
1
Presser foot
2
Presser foot lifter
machine.
holder. The presser foot will drop off.
1 Needle
2
Presser foot lifter
3
Foot holder
4 Lever
machine.
lies just under the groove of the foot holder.
presser foot is secure.
1 Foot holder
2 Groove
3
Pin
1 To increase
To decrease
2
Adjusting dial
3