Transmitted Data - Roland GR-20 Mode D'emploi

Chapitre 6 Appendices
●Pitch Bend Change
STATUS SECOND
EnH llH
n=MIDI Channel Number:
mm,ll=Value:
■Channel Mode Message
●All Note Off
STATUS SECOND
BnH 7BH
n=MIDI Channel Number:
* Can be received only through the Basic channel
* Turn off all notes that are now on.
●OMNI OFF
STATUS SECOND
BnH 7CH
n=MIDI Channel Number:
* Can be received only through the Basic channel.
* Will act the same as All Note Off.
●OMNI ON
STATUS SECOND
BnH 7DH
n=MIDI Channel Number:
* Can be received only through the Basic channel.
* Will act the same as All Note Off.
●MONO
STATUS SECOND
BnH 7EH
n=MIDI Channel Number:
mm=Number of Individual Channels:
* Can be received only through the Basic channel.
* Will act the same as All Note Off.
●POLY
STATUS SECOND
BnH 7FH
n=MIDI Channel Number:
* Can be received only through the Basic channel.
* Will act the same as All Note Off.
■System Realtime Message
●Active Sensing
STATUS
FEH
* Having received this message, the GR-20 expects to receive information of any status of
data during about 420msec.If the GR-20 doesn't receive any message during that time, it
acts as if the All Note Off message is received, and returns to normal operation (will not
check interval of messages).
40
THIRD
mmH
0H - FH (ch.1 - ch.16)
00H, 00H - 7FH, 7FH (-8192 - +8191)
THIRD
00H
0H - BH (ch.1 - ch.12)
THIRD
00H
0H - BH (ch.1 - ch.12)
THIRD
00H
0H - BH (ch.1 - ch.12)
THIRD
mmH
0H - BH (ch.1 - ch.12)
00H - 10H (0 - 16)
THIRD
00H
0H - BH (ch.1 - ch.12)
■System Exclusive Message
STATUS SECOND
F0H iiH ddH
F0H:
ii = ManufacturerID:
dd ......ee = Data:
F7H:
* For more details, refer to the page of "Roland Exclusive message" and Section 3 or after.

2. Transmitted Data

■Channel voice messags
●Note Off
STATUS SECOND
9nH kkH
n=MIDI channel Number:
kk=Note Number:
●Note On
STATUS SECOND
9nH kkH
n=MIDI Channel Number:
kk=Note Number:
vv=Velocity:
●Control Change
❍Bank Select
STATUS SECOND
BnH 00H
BnH 20H
n=MIDI Channel Number:
mm,ll=Bank Number:
❍Foot Type
STATUS SECOND
BnH 04H
n=MIDI Channel Number:
vv=Control Value:
* When the Expression pedal is operated with EXP TYPE = "FL", "EF", the GR-20 sends
this as the operation.
❍Data Entry
STATUS SECOND
BnH 06H
BnH 26H
n=MIDI Channel Number:
mm,ll=the value of the parameter specified by RPN
❍Volume
STATUS SECOND
BnH 07H
n=MIDI Channel Number:
vv=Volume:
* Transmitted the total volume fixed with expression pedal and GK PU operation.
THIRD
eeH F7H
System Exclusive
41H (65)
00H - 7FH (0 - 127)
EOX (End Of Exclusive)
THIRD
00H
0H - FH (ch.1 - ch.16)
00H - 7FH (0 - 127)
THIRD
vvH
0H - FH (ch.1 - ch.16)
00H - 7FH (0 - 127)
01H - 7FH (1 - 127)
THIRD
mmH
llH
0H - FH (ch.1 - ch.16)
00H, 00H - 0AH, 00H
THIRD
vvH
0H - BH (ch.1 - ch.12)
00H - 7FH (0 - 127)
THIRD
mmH
llH
0H - FH (ch.1 - ch.16)
THIRD
vvH
0H - FH (ch.1 - ch.16)
00H - 7FH (0 - 127)