Maintenance And Safety; Transport - LaserLiner SensoMaster 400 Mode D'emploi

SensoMaster 400

MAINTENANCE AND SAFETY

CLEANING: Do not wipe dust or dirt off the detector reception window or display
windows with a dry cloth or other abrasive material as scratching could occur,
reducing visibility through these windows. A soft cloth and mild soap and water are
effective. The unit may be submerged under water or sprayed with a low pressure
hose if necessary. Do not use any other fluids other than water as they may attack
polymer components.
TRANSPORT: Use the original carton or a laser instrument case to transport the
detector.
STORAGE: If the detector will not be used for a month or more, it is recommended
to remove the batteries.
BATTERIES: It is recommended to use only high quality alkaline or rechargeable
batteries.
Intended Uses of Detector: The laser detector is designed and suitable for detecting
a rotating laser beam.
Prohibited Uses:
- Operation without instruction.
- Operation other than the intended uses.
- Opening the detector, except the battery compartment.
- Modification or conversion of the detector.
PRECAUTIONS:
- The person in charge of the detector must understand the instructions in this
manual and ensure other users do also.
- Periodically carry out test measurements, particularly after the detector has been
subjected to abnormal use and before and after important measurements.
38 ENGLISH