LaserLiner SensoMaster 400 Mode D'emploi page 33

MENU FUNCTIONS:
AVG - Numeric & Arrow Averaging - HI / MD / LO :
Averages laser beam strikes to improve arrow display performance at long distances.
Algorithm factors in laser RPM and accuracy setting.
- MD is default setting and used for most applications.
- HI can be used in windy conditions, when the laser beam may be unstable, or when
working at long distances.
Note: Refer to the laser's specifications for accuracy and distance information.
- LO uses minimum averaging to display laser strikes.
D.R.O. - Digital Read Out - ON / OF:
Turns the numeric display On or Off. Default is ON.
UNIT - Units of Measure:
Select centimeters (cm), millimeters (mm), inches (in), fractional inches (in), or feet (ft).
Default is mm.
FRC.R - Fractional Reduction - ON / OF:
Applied when fractional inches are Units of Measure selected.
- ON reduces fractions to the least common denominator.
- OFF leaves fraction in reducible form.
Default is ON.
SensoMaster 400
ENGLISH ENGLISH 33