General Safety Instructions - LaserLiner ClimaData Stick Mode D'emploi

Completely read through the operating instructions, the „Warranty
and Additional Information" booklet as well as the latest information
!
under the internet link at the end of these instructions. Follow the
instructions they contain. This document must be kept in a safe place
and passed on together with the device.
Function / Application
This measuring device is used for long-term and real time measurement
of ambient temperature and humidity. Measurements are stored internally
and can be accessed by connecting the device to a PC via USB. Using the
supplied software on a PC, the measurement parameters can be configured,
a new measurement prepared, and the data subsequently analysed.

General safety instructions

– The device must only be used in accordance with its intended purpose
and within the scope of the specifications.
– The structure of the device must not be modified in any way.
– Do not expose the device to mechanical stress, extreme temperatures
or significant vibration.
Safety instructions
Dealing with electromagnetic radiation
– The measuring device complies with electromagnetic compatibility regulations
and limit values in accordance with EMC-Directive 2014/30/EU.
– Local operating restrictions – for example, in hospitals, aircraft, petrol stations
or in the vicinity of people with pacemakers – may apply. Electronic devices
can potentially cause hazards or interference or be subject to hazards or
interference.
Information on maintenance and care
Clean all components with a damp cloth and do not use cleaning agents,
scouring agents and solvents. Store the device in a clean and dry place.
ClimaData Stick
11
EN