Table Des Matières; Intended Use; Definition Of Term; Operating Instructions - Burkert 0127 Manuel D'utilisation

Contents
1 Operating Instructions ............................................................................................................2
2 Intended use ...................................................................................................................................3
3 Basic safety instructions.......................................................................................................3
4 Modularity .........................................................................................................................................4
5 Technical Data...............................................................................................................................5
6 Installation ..................................................................................................................................................7
7 Maintenance / Malfunctions ..........................................................................................11
8 Replacement parts .................................................................................................................11
9 Transport, Storage, Disposal ...........................................................................................11
2
2

INTENDED USE

Valve Type 127 has been designed as a rocker solenoid valve
with isolating diaphragm.
It is suitable for laboratory, medical and analysis technology
▶ Use according to the authorized data, operating conditions, and
conditions of use specified in the contract documents and operat-
ing instructions.
▶ The valve must not be used outdoors.
▶ Use the device only in conjunction with third-party devices and
components recommended and authorized by Bürkert.
▶ Use device only when in perfect condition and always ensure
proper storage, transportation, installation and operation.
▶ Use the device only as intended.

2.1 Definition of term

The term "device" used in these instructions always stands for the
flipper solenoid valve type 0127.
General hazardous situations.
To prevent injuries:
▶ Do not make any internal or external changes on the device and do
not subject it to mechanical stress.
▶ Secure to prevent unintentional actuation.
▶ Only trained technicians may perform installation and maintenance
work.
▶ The valves must be installed in accordance with the regulations
applicable in the country.
▶ After an interruption in the power supply, ensure that the process is
restarted in a controlled manner.
▶ Observe the general rules of technology.
4
english
english
1

OPERATING INSTRUCTIONS

The operating instructions contain important information.
▶ Read the instructions carefully and follow the safety instructions in
particular, and also observe the operating conditions.
▶ Instructions must be available to each user.
▶ The liability and warranty for Type 0127 are void if the operating
instructions are not followed.
1.1 Symbols
→
designates a procedure which you must carry out.
▶ Designates an instruction to prevent risks.
Warning of injuries:
DANGER!
Imminent danger. Serious or fatal injuries.
WARNING!
Potential danger. Serious or fatal injuries.
CAUTION!
Danger. Minor or moderately severe injuries.
Warns of damage to property:
NOTE!
3

BASIC SAFETY INSTRUCTIONS

These safety instructions do not make allowance for any contin-
gencies and events which may arise during installation, operation and
maintenance.
Danger - high pressure!
▶ Before loosening the lines and valves, turn off the pressure and
vent the lines.
Risk of injury due to electric shock.
▶ Before working on the system or device, switch off the power sup-
ply and secure to prevent reactivation.
▶ Observe applicable accident prevention and safety regulations for
electrical equipment.
Risk of burns/risk of fire if used continuously through hot device
surface!
▶ Keep the device away from highly flammable substances and media
and do not touch with bare hands.
english
NOTE!
Electrostatic sensitive components / modules.
The power reduction electronics, which is available as an accessory,
contains electronic components which react sensitively to elec-
trostatic discharge (ESD). Contact with electrostatically charged
persons or objects is hazardous to these components. In the worst
case scenario, they will be destroyed immediately or will fail after
start-up.
• Observe the requirements in accordance with EN 61340-5-1 and
5-2 to minimize or avoid the possibility of damage caused by a sudden
electrostatic discharge.
• Do not touch live electronic components.
4

MODULARITY

The valve is modular in design and can be supplied with different line
connections according to the application case. It can be used individually
and in blocks.
Type 0127
3