Installation Instructions - Franke FHCR 604 2I 1 FLEXI T PWL Notice D'utilisation

INSTALLATION INSTRUCTIONS

The installation comes under the exclusive responsibility of specialists.
The installer is held to respect the legislation and the standards enforce in his home country.
How to stick the gasket:
The gasket supplied with the hob avoids all infiltration of liquids in the cabinet.
His installation has to be done carefully, in conformity of the following drawing.
Fitting - installing:
• The cut out sizes are:
Ref.
108.0377.087
FHCR 604 2I 1FLEXI T PWL
108.0377.090
FHCR 774 2I 1FLEXI T PWL
• Ensure that there is a distance of 50 mm between the hob and the wall or sides.
• The hobs are classified as "Y" class for heat protection. Ideally the hob should be installed
with plenty of space on either side. There may be a wall at the rear and tall units or a wall
Cut size Cut size flush mounting
Width Depth
560 490
750 490
Stick the gasket (2) two millimeters from
the external edge of the glass, after
removing the protection sheet (3).
Width Depth Radius
596 526
786 526
18
Glass size
Width Depth
8 590 520
8 780 520
Thickness
4
4