Starting-Up; Pan Detection; Residual Heat Indication; Booster Function - Franke FHCR 604 2I 1 FLEXI T PWL Notice D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Starting-up

Start up / switch off the hob:
Action
To start
To stop
Start up / switch off a heating zone:
Action
Zone selection
To set
(adjust the power)
To stop
If no action is made within 20 second the electronics returns in waiting position.

Pan detection

The pan detection ensures a perfect safety. The induction doesn't work:
• If there is no pan on the heating zone or if this pan is not adapted to the induction. In this
case it is impossible to increase the power and the display shows [ U ]. This symbol
disappears when a pan is put on the heating zone.
• If the pan is removed from the heating zone the operation is stopped. The display shows
[ U ]. The symbol [ U ] disappears when the pan is put back to the heating zone. The
cooking continues with the power level set before.
After use, switch the heat element off: don't let the pan detection [ U ] active.

Residual heat indication

After switching off of a heating zone or the complete stop of the hob, the heating zones are still
hot and indicates [ H ] on the display.
The symbol [ H ] disappears when the heating zones may be touched without danger.
As far as the residual heat indicators are on don't touch the heating zones and don't put any heat
sensitive object on them. There are risks of burn and fire.

Booster function

The booster function [
If this function is activated the heating zones work during 5 minutes with an ultra high power.
The booster is foreseen for example to heat up rapidly big quantities of water, like nuddles.
Start up / Stop the booster function:
Action
Zone selection
Start up the Booster
Stop the Booster
Control panel
press key [
press key [
Control panel
Press [ 0 ] of the selected zone
Slide on the "SLIDER"
to the right or to the left
Slide to [ 0 ] on "SLIDER"
or press on [ 0 ]
] grants a boost of power to the selected heating zone.
Control panel
Press key [ 0 ] from the zone
Press key [
Slide on the "SLIDER"
Or press [
]
]
]
]
9
Display
[ 0 ] are blinking
nothing or [ H ]
Display
[ 0 ] and control light on
[ 0 ] to [ 9 ]
[ 0 ] or [ H ]
[ 0 ] or [ H ]
Display
[ 0 ] and control light on
[ P ] during 5 min
[ P ] to [ 0 ]
[ 9 ]

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Fhcr 774 2i 1flexi t pwl108.0377.087108.0377.090

Table des Matières