Kessel Minilift S Notice D'utilisation D'origine page 35

4.4 Connecting the pipes
Fit the sockets:
▶ Check whether the seal is in the socket. ➊
3
▶ Insert the socket mating part into the pre-drilled opening from the inside. ➋
2
▶ Screw the socket hand-tight onto the mating part so that tightness is guaran-
teed. ➌
▶ Push the pipe in as far as it will go. ➍
▶ Carry out these steps again for the conduit pipe.
1
4
Fig. [7]
016-083_02 Installation and operating manual 35