Radio and satellite radio
28
Commands
"Help radio"
Use the command "Help radio" to have all the
commands for the radio read out.
The main categories are read out first. After a
main category has been selected, the availa-
ble commands are read out.
"Help satellite radio"
Using the command "Help satellite radio", you
can have all the commands for the satellite
radio read out.
Selecting a waveband
You can set the waveband using the following
commands:
"FM"
R
"AM"
R
"Weather band"
R
"Next station"/"Previous station"
You can start manual tuning and set the next
station using the following commands:
"Next station"
R
"Previous station"
R
Selecting a frequency
You can select radio frequencies within the
FM range (87.7 to 107.9 megahertz) and
within the AM range (530 to 1720 kilohertz)
directly. The Voice Control System also rec-
ognizes the words "frequency", "point", "meg-
ahertz" and "kilohertz".
Example of dialog:
\ Ninety seven point five megahertz
_ The Voice Control System sets the fre-
quency.
Example of a station name.
5
"Save station"
Use the command "Save station" to assign a
voice tag to the station currently selected.
Use this command:
to improve voice recognition of difficult
R
names
if you want to use a name of your own
R
You could, for example, save a station with
the name "Favorite station".
When you have said the command, the Voice
Control System prompts you up to three
times to say the station name. When repeat-
ing the station name, make sure that you pro-
nounce it in exactly the same way as you did
the first time. Otherwise, the name cannot be
saved and the Voice Control System cancels
the saving procedure.
Example of dialog:
\ Save station
^ Please say the station name.
5
\ Favorite station
^ Please repeat the station name.
5
\ Favorite station
^ "Favorite station" has been saved.
"Select station"
Use the command "Select station" to select a
receivable or stored station.
Example of dialog:
\ Select station
^ Please say the station name.
\ Favorite station
5
_ The Voice Control System sets the sta-
tion.
"Favorite station"
Using this command, you can select a stored
station.