Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Cancels the dialog with the
:
%
Voice Control System
Starts the dialog with the
;
?
Voice Control System
Accepts a call
=
6
Ends a call
~
Decreases the volume
X
Increases the volume
W
Mute
8
Starting the dialog
Switch on the ignition (see the vehicle
X
Operator's Manual).
Press the ? button on the multifunction
X
steering wheel.
An acoustic signal sounds. The dialog has
been started.
Say a command.
X
Interrupting/continuing the dialog
Interrupting a dialog
If a list appears on the display, you can use the
command "Pause" to interrupt the dialog.
Say the command "Pause".
X
You can then select an entry using the
COMAND controller.
Continuing a dialog
Press the ? button on the multifunction
X
steering wheel.
The dialog with the Voice Control System is
resumed.
Display information
Canceling the dialog
Press the % button on the multifunction
X
steering wheel.
or
Say the command "Cancel" (except when
X
recording voice tags, making navigation
entries or during individualization).
or
Press any button on COMAND.
X
Adjusting the volume
Start the dialog.
X
Say a command, such as "Help".
X
Press the W or X button.
X
The volume increases or decreases during
the voice output.
or
Adjust the volume for voice output on the
X
volume control for COMAND (see vehicle
Operator's Manual).
Help function
The Voice Control System has an extensive
acoustic help function. If you say the com-
mand "Help telephone", the Voice Control
System reads out all the major commands for
the telephone.
The help commands for the particular appli-
cation can be found in the relevant section.
Further help commands can be found from
(
page 36).
Y
Further information on the help function can
be found from (
page 44).
Y
Display information
The audible help function can be supplemen-
ted by visual help on the display
(
page 48). If the help function is switched
Y
11
Publicité
Chapitres
Table des Matières
