Mercedes-Benz Voice Control System Notice D'utilisation Complémentaire page 33

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

are skipped. If you select an empty slot with
the "CD/DVD 1" to "CD/DVD 6" command,
the current slot remains selected.
To select the CD/DVD/MP3 application:
X
press the ? button on the multifunction
steering wheel.
Say one of the following commands:
X
"CD player"/"CD changer"
R
"Audio DVD"
R
"Video DVD"
R
"MP3"
R
Press the ? button on the multifunction
X
steering wheel.
Say one of the CD/DVD/MP3 commands
X
explained below.
Commands
"Help CD"/"Help DVD"/"Help MP3"
You can use the following commands to have
all the commands for the CD, DVD, or MP3
player read out:
"Help CD"
R
"Help audio DVD"
R
"Help video DVD"
R
"Help MP3"
R
"Next CD"/"Next DVD"
The commands "Next CD"/"Next DVD" are
used to select the next CD/DVD from your
DVD changer.
"Track 1" to "Track 99"
Use the commands "Track 1" to "Track 99" to
select a track number from the active
medium.
"Next track"
You can use the "Next track" command to
select the next track.
CD/audio DVD and MP3 mode
"Previous track"/"Repeat track"
Use the commands "Previous track"/"Repeat
track" to repeat the track just played. If the
command is spoken as the first few seconds
of the track are played, the previous track is
selected.
"Group 1" to "Group 9"
Use the commands "Group 1" to "Group 9" to
select a group on an inserted audio DVD.
"Next group"/"Previous group"
Use the following commands to select the
next or the previous group on the audio DVD
inserted:
"Next group"
R
"Previous group"
R
"Next folder"/"Previous folder"
Use the commands "Next folder"/"Previous
folder" to select a folder on the active medium
in MP3 mode.
"Memory card"
Using the command "Memory card", you can
change to the SD memory card on COMAND.
"Video DVD"
With the command "Video DVD", you can
start a video DVD on COMAND.
"Hard disk"/"MUSIC REGISTER"
With the commands "Hard drive"/"MUSIC
REGISTER", you can switch to the internal
hard drive (MUSIC REGISTER) of COMAND.
"USB"
With the "USB" command, you can switch to
the USB storage device on COMAND.
31
Z

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

1725847200

Table des Matières