REC BUTTON SET
[
REC BUTTON SET] is added to the [REC SET] menu, and you can start and stop
recording on different recording media at different times by operating the START/STOP
button or the handle START/STOP button.
In the default setting, movies are recorded on both the memory card and the flash memory unit
at the same time when either START/STOP button is pressed.
• REC BUTTON: [
• HANDLE REC BUTTON: [
To change the setting
Press MENU t select
SET] with the SEL/PUSH EXEC dial.
The setting of REC BUTTON SET
REC BUTTON: [
HANDLE REC BUTTON:
[
] [
]
REC BUTTON: [
HANDLE REC BUTTON: [
REC BUTTON: [
HANDLE REC BUTTON: [
You can use [
REC BUTTON SET] when (1) [
[
SIMULTANEOUS REC] is set to [ON].
When the camera is set to [
recording is set to off, [
z Tips
• Using this function, you can, for example, perform usual recording to a memory card (using the START/
STOP button), while also recording non-stop to a backup high-capacity flash memory unit - started by the
handle START/STOP button - until the end of shooting.
• While recording on the flash memory unit, if you start a separate recording on a memory card, use a
memory card that has been formatted by this camcorder.
• While recordings on a flash unit and memory card are in progress, if a recording error occurs on the
memory card and recording stops, you cannot restart recording on the memory card unless you stop
recording on the flash memory unit and reformat the memory card.
• You can check the setting value of [
Reviewing the most recently recorded scene (Last Scene Review)
When recording on both media separately by setting [
scene recorded on the media selected in [MEDIA SELECT] will be played back.
] [
]
] [
]
(REC/OUT SET) menu t [REC SET] t [
The recording media and button
] [
]
Recording on both the memory card and the flash
memory unit starts and stops at the same time when
either START/STOP button is pressed.
]
Recording on the memory card starts and stops when
]
the START/STOP button is pressed, and on the flash
memory unit when the handle START/STOP button is
pressed.
]
Recording on the flash memory unit starts and stops
]
when the START/STOP button is pressed, and on the
memory card when the handle START/STOP button is
pressed.
] mode, when [
REC BUTTON SET] cannot be used.
REC BUTTON SET] with the status check function.
/
SET] is set to [
] image quality is selected, or simultaneous
REC BUTTON SET], the last
REC BUTTON
] and (2)
GB
5