Publicité
GB
Please read carefully the following Operating Instructions before putting the appliance into operation
A.V. 2 Any reprints, even partial, are subject to approval. Technical changes reserved.
Marking:
Product safety:
Product corresponds to appropriate
standards of the EU
Prohibitions:
General prohibition mark
Using the appliance when wet
prohibited!
Warning:
Warning/attention
Keep safety distance
Commands:
Read the Operating Instructions!
Wear safety gloves!
Environment protection:
Dispose waste professionally so as
not to harm the environment.
Any damaged or disposed electric
or electronic devices must be
delivered to appropriate collection
centres.
Package:
Protect against humidity
Illustrative pictures! Translation of original operating instructions.
Do not touch rotating parts
Don´t pull the cable
Beware of hazardous volrage
Wear PPE (ear protection aids,
eye protection
Packing cardboard material
may be delivered to collecting
centres for recycling..
This side up
Technical data:
Engine power
Average blade
Idle speed
Ø hole
Appliance
Metal saw GMT 355
Metal-parting saw for cross-sections, lengthwise and skew
profiles to 45° of metal materials without cooling agents being
supplied. Acoustic level pressure 112 dB (A).
Appliance description (pic. a, b and c)
1.
Clamping crank
2.
Quick operating clamp lever
3.
Stop square
4.
Depth stop
5.
Disc protection
6.
Suction connection
7.
Grinding carbons enclosure
8.
Handgrip
9.
Switch and safety device
10. Disc protection/ disk lock
11. Transport lock
12. Depth stop (see 4)
13. Locking angles set-up
14. Locking angles scale
Warranty
A warranty period of 12 months applies to commercial use
and 24 months apply to private use and commences on the
day of purchase of the device.
Warranty applies exclusively to failures due to defective
material or workmanship. An original sale slip with indication
of date of sale must be presented in case of claiming for the
warranty rights.
Warranty does not cover unprofessional use such as device
overload, violent use, damage caused by third party or foreign
materials, failure to comply with operations and assembly
manual, and normal wear and tear.
Important basic safety instructions
Before you start working with the appliance please read
carefully the following safety regulations and Operating
Instructions. If any other person is to handle the appliance
9
Connector
Noise value
Weight
Publicité
