To Perform A Factory Reset - Pioneer MEP-7000 Mode D'emploi

USING THE UTILITY

TO PERFORM A FACTORY RESET

All unit settings can be restored to their factory default values by
using the UTILITY screen (P. 60). The settings on TIME/REMAIN,
A.CUE, and TEMPO range will also be restored to their factory
default values (REMAIN, OFF, 10%).
1 With the power turned OFF, hold the UTILITY button
depressed while setting power to ON.
The button must be depressed for five seconds or more.
2 Confirm message.
After the boot-up screen appears, a message will be displayed:
[The settings have been reset to factory defaults].
3 Turn power OFF and ON again.
MEMO
• Recorded playlists and cue and loop point data are not deleted
during a factory reset.
63
En