Cross Fade - Pioneer MEP-7000 Mode D'emploi

ADVANCED OPERATIONS SECTION
 BPM SYNC
Sets the BPM SYNC ON/OFF.
When BPM SYNC is set to ON, the tempo of the next track is
automatically adjusted to match the BPM of the currently
playing track.
MEMO
• The tempo will not change if the tempo variable range is
exceeded (music CD [CD-DA] ± 100 %, MP3/AAC/WAV/AIFF:
± 16 %).
 MIX mode select
CUT-IN
Playback of the currently playing track stops and switches
instantly to the next track.
ZIP
The pitch of the currently playing track gradually decreases
until it can no longer be heard, at which point playback of the
next track begins.
ECHO
One beat of sound continues repetitively and fades until it can
no longer be heard, at which point playback of the next track
begins.

CROSS FADE

The currently playing track fades out as playback of the next
track fades in; when the fade out / fade in is completed, the
track changes.
MEMO
• If none of the MIX modes is selected, one of the four (CUT-IN,
ZIP, ECHO, CROSS FADE) will be selected at random.
 Instant Change Function
Using the instant change function, you can switch from the
currently playing track to another desired track at the timing of
your choice.
1 While one track is playing, setup the next track.
Load a track on the controller opposite the one currently
playing, and set to cue standby.
MEMO
• Tracks can be set not only from the BROWSE screen, but from
the MIX screen as well. With a playlist opened on the MIX
screen, rotate the rotary selector dial; the cursor will appear
and both LOAD buttons will flash. In this condition, press the
LOAD button and the track selected by the cursor will be set in
either controller A or B.
2 Press the MIX button.
The MIX screen will appear in the center display.
The LOAD button for the controller on cue standby will flash.
3 Select the desired MIX mode.
Press the function button to select the MIX mode.
If none of the MIX modes is selected, one of the four modes will
be selected at random.
4 Press the flashing LOAD button.
The playback will switch by the selected MIX mode.
MEMO
• If the flashing LOAD button is pressed again while the tracks
are still changing, the track mixing will be canceled.
43
En