Auto Cue Function - Pioneer MEP-7000 Mode D'emploi

BASIC CONTROLLER OPERATIONS

AUTO CUE FUNCTION

When a track is first loaded or track search is performed, this
function automatically sets a cue point immediately before the
point that music begins, and then sets the player to cue standby at
that point.
Turning Auto Cue ON/OFF
• The auto cue function can be turned ON/OFF by holding the
TIME/A.CUE button depressed for one second or more.
• The auto cue function is ON when the [A.CUE] indicator is
lighted in the display.
• The status of the A.CUE function remains the same even when
power is turned OFF.
• The auto cue level can be changed if desired.
Changing the Auto Cue Level
1 Hold the TIME/A.CUE button depressed for five seconds or
more.
The display will show [–60db] (in default condition).
2 Press the PITCH BEND (+, –) buttons to change the value.
• The level can be set to one of the following values:
–36 dB, –42 dB, –48 dB, –54 dB, –60 dB, –66 dB, –72 dB,
–78 dB.
• To cancel the auto cue adjust mode, either press the TIME/
A.CUE button, or wait 15 seconds, and it will be
automatically canceled.
• The selected level is preserved even when power is turned
OFF.
• The auto cue level can also be changed from within the
UTILITY screen.
37
En