Wall Mounting - EUROM Mon Soleil 350 Manuel D'utilisation

Wall mounting:

The heater must be at least 30 cm removed from all objects, walls, etc.; the
distance to the floor must be at least 20 cm and there must be at least 30 cm
above the heater.
Pay attention: The wall-suspension system on the rear side of the heating panel is
pre-mounted in order to hang the heating panel vertically. Viewed from the front,
the main switch is at the bottom side and the control panel is at the right-hand
side. If you want to hang the heating panel horizontally, you first have to mount
the suspension frame, the suspension knobs and the wall spacer on the rear side of
the heating panel in a different manner. Using a Phillips screwdriver, you can
detach the suspension knobs and the wall spacer and then mount them in another
position (see illustration). In case of horizontal mounting, it is sensible to use an
external temperature sensor. This is because – when mounting the panel
horizontally – the fixed temperature sensor is positioned at the top right-hand side
of the panel and therefore, it measures a higher temperature. For measuring the
room temperature correctly, it is better to use an external temperature sensor and
to move the sensor downwards to below the heating panel.
A. Suspension frame including
suspension knobs
B. Wall spacer
38