EUROM Mon Soleil 350 Manuel D'utilisation page 44

using the main switch or removing the plug from the socket. Otherwise,
the panel would switch on and off at the wrong times.
Switching the week times on again is described below.
Please note that the abovementioned does not apply when using the
Eurom Smart APP. The APP updates the time automatically and
therefore, you do not have to enter the time manually.
Attention: If in the time setting mode no button is pressed for five (5) seconds,
the timer-setting mode will stop and you will have to start all over
again.
Attention: All timer settings – maximum 28 settings: seven (7) days multiplied by
maximum four (4) settings per day – are processed consecutively.
therefore, make sure that they do NOT contain contradictions.
Step Press
button:
1 WEEK (3 sec.) UU flashes
2 SET
3 + or –
4 OK
5 SET
6 OK
7 SET
8 + or –
9 OK
10 EDIT
11 + or –
12 OK
13 TEMP
The display
shows:
ON/OFF flashes
UU
01 or 99 flashes
UU
U1 flashes
U1 to U7 flashes
The selected day
01 flashes
The selected
number
HP flashes
Explanation:
Select:
+ = ON: Timer on (on the set times,
the heater will automatically switch
on/off)
– = OFF: Timer off (on the set times,
the heater will not automatically
switch on/off)
Select:
+ = 01: All timer settings are
executed only once
– = 99: All timer settings are
executed endlessly [see Attention
(1)].
Select the day of the week (1 =
Monday, 2 = Tuesday, etc.) for which
you want to make a timer setting.
You should give a number (1 to 4) to
this day, because you can only make
four (4) timer settings per day. The
sequence of the numbering is not
important [see Attention (2)].
44