1. Clean the pot with hot water and a mild detergent. Dry the pot thoroughly before you
stow it.
2. Take the gasket out of the cooking lid.
3. Clean the cooking lid and gasket with warm water and a mild detergent. Only put the
gasket back in once the lid and gasket are completely dry.
4. The valves should always be clean and free of residue of any kind. If a valve is
plugged, use a toothpick to remove any residue.
5. The cooking lid and gasket are not suitable for the dishwasher.
6. Store all parts in a clean, dry place!
Troubleshooting
If the device is not working properly, please check whether you are able to rectify the
problem yourself fi rst.
Do not attempt to repair a defective device yourself!
Problem
Steam is emitted from
the lid or water drips
from the edge of the
lid.
Technical data
Model:
Product number:
Operating pressure:
Capacity:
Disposal
The packaging material is recyclable. Dispose of the packaging in an environ-
mentally-friendly manner and make it available to the collection service for recyc-
lable materials. Dispose of the product in an environmental-friendly manner. For
more information, please contact the administration in your community.
17
Possible Cause
•
The gasket is soiled or
has not been inserted
properly.
•
The gasket is damaged.
•
The lid has not been
properly secured.
•
The valves are soiled.
CK-S93120
Z 09869
max. 0.025 bar
6 l
Solution
•
Clean
the
gasket
when inserting the gasket,
make sure it is correctly
seated.
•
Replace the gasket.
•
Put the lid back on and se-
cure it with both lid closures.
•
Clean the valves (see
chapter
"Cleaning
storage").
Customer service/im-
porter:
DS Produkte GmbH
Am Heisterbusch 1
19258 Gallin
Germany
Tel.: +49 38851 314650
*) Calls subject to a charge.
Costs vary depending on
the provider.
All rights reserved.
EN
and
and