Installation Instructions; Removal Of Packaging; Positioning And Levelling; Electrical Connection - Fagor EVO-CONCEPT CO-402BDD Instructions D'installation, D'utilisation Et D'entretien

4. INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS
The positioning and installation, and all repairs or modifications,
should always be carried out by an AUTHORISED TECHNICIAN, should always be carried out by an AUTHORISED TECHNICIAN, should always be carried out by an AUTHORISED TECHNICIAN,
in accordance with the applicable legislation of the country. in accordance with the applicable legislation of the country. in accordance with the applicable legislation of the country.
The installation, incorrect adjustment, inappropriate maintenance or use The installation, incorrect adjustment, inappropriate maintenance or use The installation, incorrect adjustment, inappropriate maintenance or use of
the appliance may cause material damages and injuries. the appliance may cause material damages and injuries. the appliance may cause material damages and injuries.

4.1 Removal of packaging

Remove packaging from the machine and check for damage during transportation. If any damage is Remove packaging from the machine and check for damage during transportation. If any damage is Remove packaging from the machine and check for damage during transportation. If any damage is
observed, immediately notify the supplier and the transport company. In the event of doubt, do not observed, immediately notify the supplier and the transport company. In the observed, immediately notify the supplier and the transport company. In the
use the machine until the problem has been assessed. use the machine until the problem has been assessed.
Packaging (plastic, expanded polyurethane, staples, etc...) must not be left in the Packaging (plastic, expanded polyurethane, staples, etc...) must not be left in the Packaging (plastic, expanded polyurethane, staples, etc...) must not be left in the
reach of children, they are a potential hazard. reach of children, they are a potential hazard.
The machine should be moved using a fork The machine should be moved using a fork-lift truck or similar to avoid damage to the structure.
Transport the machine to the installation location and then remove packaging. Transport the machine to the installation location and then remove packaging. Transport the machine to the installation location and then remove packaging.
All the packaging can be recycled. All the packaging can be recycled. Dispose of packaging correctly.

4.2 Positioning and levelling

Positioning and levelling
This appliance has adjustable feet to allow it to be adjusted to the correct height has adjustable feet to allow it to be adjusted to the correct height has adjustable feet to allow it to be adjusted to the correct height, it
is done by turning the foot to the desired height. For optimum operation, it is is done by turning the foot to the desired height
essential that the machine is correctly levelled. The flooring on which the machine essential that the machine is correctly levelled. The flooring on which the machine essential that the machine is correctly levelled. The flooring on which the machine
is to be installed must be able to bear the full weight of the machine.
Inspect final location of the machine prior to installation to prevent Inspect final location of the machine prior to installation to prevent Inspect final location of the machine prior to installation to prevent
damage during use. damage during use.

4.3 Electrical connection

An AUTHORISED TECHNICIAN should always carry out the appliance's electrical connection. An AUTHORISED TECHNICIAN should always carry out the appliance's electrical An AUTHORISED TECHNICIAN should always carry out the appliance's electrical
The legal standards in force in each country regarding connection to the mains should be taken into The legal standards in force in each country regarding connection to the mains should be taken into The legal standards in force in each country regarding connection to the mains should be taken into
account.
• Check that the mains voltage corresponds to that indicated on the nameplate.
• The electric cable should be flexible, with an oil
• The cross-
• An easily accessible switch device should be installed next to the appliance for all
• The appliance must be earthed using a differential protector. The manufacturer will
If any faults are observed during the installation, the supplier should be notified immediately. If any faults are observed during the installation, the supplier should be notified immediately. If any faults are observed during the installation, the supplier should be notified immediately.
•
The manufacturer will not be held liable for any personal or material damage to the The manufacturer will not be held liable for any personal or material damage to the The manufacturer will not be held liable for any personal or material damage to the
machine resulting from incorrect installation or failure to comply with the
manufacturer's specifications. manufacturer's specifications.
positioning and installation, and all repairs or modifications, positioning and installation, and all repairs or modifications,
must be able to bear the full weight of the machine.
Check that the mains voltage corresponds to that indicated on the nameplate. Check that the mains voltage corresponds to that indicated on the nameplate.
The electric cable should be flexible, with an oil-proof covering, and it should not
weigh less than the cable in an ordinary sleeve made of standard polychloroprene weigh less than the cable in an ordinary sleeve made of standard polychloroprene weigh less than the cable in an ordinary sleeve made of standard polychloroprene
or an equivalent synthetic elastomer (H05RN-F). or an equivalent synthetic elastomer (H05RN
-section of the power cable must be suitable for th section of the power cable must be suitable for the rated current of the
machine.
ily accessible switch device should be installed next to the appliance for all ily accessible switch device should be installed next to the appliance for all
the phases, with a minimum gap of 3 mm between contacts. This switch should be the phases, with a minimum gap of 3 mm between contacts. This switch should be the phases, with a minimum gap of 3 mm between contacts. This switch should be
used to disconnect the appliance during installation, repair, cleaning and used to disconnect the appliance during installation, repair, cleaning and used to disconnect the appliance during installation, repair, cleaning and
maintenance work. The switch should have fuses suitable for use with the rated maintenance work. The s
current (A) of the machine. current (A) of the machine. Alternatively, a suitable magneto
used.
The appliance must be earthed using a differential protector. The manufacturer will The appliance must be earthed using a differential protector. The manufacturer will
not be held liable for dam not be held liable for damage originated by failure to observe this requirement.
resulting from incorrect installation or failure to comply with the resulting from incorrect installation or failure to comply with the
truck or similar to avoid damage to the structure.
. For optimum operation, it is
witch should have fuses suitable for use with the rated
Alternatively, a suitable magneto-thermal switch may be
age originated by failure to observe this requirement.
covering, and it should not
33